Hanging Stands- I usually hang or move approximately 25 stands every year. Over the last five years I found it frustrating to try and hang all of these stands in late summer. August can be very hot and humid in Kansas. The woods are full of vegetation, ticks, bugs, snakes, and poison oak (a growing nemesis for me). It took a lot of time to hang and trim in the stands, so by the time I finished them, I wouldn't have much time to hunt the early season. Three years ago I started hanging my bedding area stands in the spring to avoid tipping off the deer in the fall. This worked really well for me and I loved having the stands already hung and brushed in, come deer season.
Over the last two years I have carried this idea over into all of my stands. Every spring I hang my stands and brush them in. You don't have to worry about scent, bumping deer, running chain saws, or fighting thick vegetation. The stands that I don't hang are in areas that I think they can be stolen. However, I still hang and brush in the stand. I just pull the stand down when I am finished. I also pull down stands that don't have removable straps. I don't want the straps to weather or stretch out as the tree grows. All the other hang on stands and ladder stands are left in place using tie wire.
I use a simple process that I should have thought about a long time ago. Once I have a stand hung in place, I take tie wire and triple it (you can also use a heavy gauge single strand). I use the tie wire to secure the stand in place on the tree. Then I remove all of the straps that secure the stand. I leave the cable and lock on the tree stand for an added safety measure. As I remove the straps, pull up rope, etc.- I place all of these items in a gallon size zip lock storage bag and label it with the stand number. If the stand has ladder climbing sticks, I will remove the sticks and hide them under a nearby log. I place the straps for the ladder sticks in the same zip lock bag. As I leave the tree stand location I will mark my access trail with reflective trail markers. Once deer season arrives and I hunt the stand for the first time, I will head out to the stand a half hour early with the zip lock bag and secure all the straps for the remaining season. The stand is already hung and trimmed in. Sounds easy, huh? Well, it is with a little planning and organization in the spring.
Be careful hanging ladder stands. When I am hanging a ladder stand I secure one end of my hoist rope to the seat of the ladder. I will then lean it up against the tree (this can be very difficult for one person). Make sure to step on he lowest rung of the ladder to set it in the ground. I will have my assistant hold the other end of the rope tight to keep the ladder secure against the tree as I climb. As they hold it against the tree I will secure it with the provided ratchet strap.
Here is a basic list of the tools that I use when hanging tree stands:
Pole saw, chain saw, hand saw, pull up rope, safety harness, fanny pack, back pack, zip lock bags, permanent marker, reflective trail markers, orange flagging, screw in steps, wind checker, compass, toilet paper, etc.
Stand types- I use four basic styles of tree stands. They are ladders, hang-ons, climbers, and the Lone Wolf Alpha (separate category for this one). For permanent use I utilize ladder stands and large hang-on stands. I especially like the ladder stands for areas that my Dad hunts. They are comfortable, easy to get in and out of, and safer. Occasionally I will also use a climbing tree stand to access a new hunting area.
The fourth style of stand that I love to use is the Lone Wolf Alpha hang-on. This stand is super light and easy to hang. It is extremely portable and adjustable too. I like to use these stands in areas that I only plan to hunt once or twice a year. They are also good for areas where a permanent stand may be stolen. If you can't afford a lot of stands then buy just one of these stands. Here is what you can do. Pick as many stand locations as you like. Hang this stand and trim in your shooting lanes. I like to use screw in steps on these stand set ups because you can leave them in the tree. I will then pull down the stand. Now you have multiple set ups to hunt based on deer travel, wind direction, etc. Just throw this stand up in the tree that you want to hunt. The tree is already prepared for you. I absolutely love this set up!
You can also easily use the Lone Wolf to hang above an existing stand to film a buddy's deer hunt. You should have at least one of these stands in your arsenal. They give you the ability to really move around, keep the deer guessing, and cover your hunting area. I also use this stand with the Lone Wolf ladder sticks in the place of a climbing tree stand. They all weigh about the same but with the ladder sticks I don't have to find a tree without low hanging limbs. Keep in mind that deer movement changes through out the phases of the rut. This stand can help you do the same.
You should already know this but I want to remind you to purchase a quality tree stand cable lock for your stands. I prefer the bicycle lock over the traditional padlock style. They can easily cut the padlock with bolt cutters but the bicycle style is much more difficult to get through. I engrave a number on all of my keys and the locks to keep them straight.
Stand locations- First, lets discuss how high you should hang your stand. You can only hunt at your best if you are comfortable with your set up and feel safe. This means staying within your comfort level. Maybe that is 10 feet or it could be 30 feet. You will have to decide for yourself. However, you must utilize a quality fall restraint device to keep you safe. You owe this to yourself and your family! No excuses!
If you shoot a recurve bow, I would suggest that you stay under 18'. However, if you shoot a compound bow you can go higher. My ladder stands range from 17-21'. My hang on stands are usually between 20-25'. I like to be high in the trees for a couple of reasons. I want the deer to have to look up high to see my silhouette. I want to stay out of their natural field of view. I also like to be high to stay in the upper wind thermals. They higher you are the harder it is for them to smell you. However, the higher you are, the steeper your shot angle, especially on close shots. Go up as high as your comfortable in the tree. I know many successful hunters that harvest deer in stands that are under 15'. In fact, one of the biggest deer I have ever seen, walked under my stand at 12' and never knew I was there. If I have my choice though, I will be sitting in the tree around 22'.
Stand placement- I like to hang stands around feeding areas, transition areas, and on the edge of bedding areas to cover all phases of the rut. I also like to have two different set ups based on wind direction. My pro dominant wind direction is out of the south. However, the November cold fronts come out of the north, so my stands are set up accordingly.
When I hang a stand I usually have someone with me. Before I trim in the shooting lanes I climb up in the tree and ask my assistant to walk the deer trails for me. This helps me to decide if the the stand is in the right location and where I should start trimming in my best shooting lanes. I want to be able to shoot the deer trails in all directions. Sometimes bucks will walk 10 yards downwind of heavily used deer trails, so make sure it is clear to shoot a little past the trail.
Don't forget to take a hard look at how you can slip in and out of your stand without bumping deer. Use vegetation, topography, creek bottoms, wind direction, etc. to help hide your approach. You can hunt a stand numerous times if the deer don't know when you are using it.
I hope this information helps you. I am still learning, so if you have something that works well for you that I didn't mention, please let us know. Go hang some stands. It's not too late.
No comments:
Post a Comment